Meinberg LANTIME M600 Technical Information download pdf (Page 63)

Configuration: NTP

The NTP configuration page is used to set up the additional NTP parameters

needed for a more specific configuration of the NTP subsystem.

The default configuration of the timeserver consists of a local clock, which represents

the hardware clock of your LANTIME system and the GPS reference clock. The local

clock is only chosen as the NTP time reference after the GPS clock lost its

synchronisation. The stratum level of this local clock is set to 12, this ensures that

clients recognise the switchover to the local clock and are able to eventually take

further actions. The local clock can be disabled if the timeserver should not answer

any more when the reference clock is out of order.

Because the reference clock is internally connected to the LANTIME system by using

a serial connection, the accuracy using this way of synchronisation is around 1 ms.

The high accuracy of the LANTIME timeserver (around 10 microseconds) is

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 150 151

No comments

Meinberg LANTIME M600 Technical Information Page 63