Meinberg LANTIME M600 Technical Information Page 112
- Page / 151
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Safety instructions for building-in equipment
This building-in equipment has been designed and tested in accordance with the
requirements of Standard IEC60950-1 "Safety of Information Technology
Equipment, including Electrical Business Equipment".
During installation of the building-in equipment in an end application (i.e. rack)
additional requirements in accordance with Standard IEC60950-1 have to be taken
into account.
o The building-in equipment is a class 1 - equipment and must be connected to an
earthed outlet (TN Power System).
o The building-in equipment has been evaluated for use in office environment
(pollution degree 2) and may be only used in this environment. For use in
rooms with a higher pollution degree more stringent requirements are
applicable.
o The building-in equipment may not be opened.
o Protection against fire must be assured in the end application.
o The ventilation opening may not be covered.
o The equipment/building-in equipment was evaluated for use in a maximum
ambient temperature of 40 °C.
o For safe operation the building-in equipment must be protected by max 16 A
fuse in the power installation system.
o Disconnection of the equipment from mains is done by pulling the mains plug.
CE-Label
EN 60950-1
Safety of Information Technology Equipment,
including Electrical Business Equipment
Electromagnetic compatibility
EN50081-1
Electromagnetic compatibility (EMC). Generic emission
standard. Part 1: Residential, commercial and light industry
EN50082-2
Electromagnetic compatibility (EMC). Generic immunity
standard. Part 2: Industrial environment
112
- Technical Information 1
- Operating Instructions 1
- M300 / GPS 1
- Bad Pyrmont, 16. Juli 2008 2
- Table of Contents 3
- Quick Start 8
- The Modular System LANTIME 10
- Supported Network Services 12
- User Interface 13
- Network Time Protocol (NTP) 14
- NTP Target 15
- GPS170 Features 16
- Time Zone and Daylight Saving 16
- Mounting the GPS Antenna 17
- Assembly with CN-UB/E 18
- Booting the GPS receiver 19
- are +-5 ms after 20
- Configuration User Interface 21
- The menus in Detail 22
- Root Menu 22
- Menü: Reference Time 24
- Setup GPS Receiver Parameters 25
- Set Antenna Cable Length 25
- Init GPS Receiver 26
- Init GPS Position 27
- Init GPS Time 27
- Info GPS 28
- GPS Status & Version 28
- GPS Receiver Position 28
- GPS Satellite Constallation 29
- Setup GPS Outputs 29
- GPS Enable Outputs 29
- Serial Outputs 30
- for DAYLIGHT SAV 31
- Menu: Time Service 32
- Menu: external NTP 32
- Menu: Stratum of local clock 32
- Menu: Restart NTP 33
- Programmable pulse (Option) 34
- SETUP POUT X 34
- Timer mode 35
- Single Pulse 35
- Cyclic mode 36
- PPS, PPM, PPH Modes 36
- Menu: TIME CODE IRIG (Option) 37
- Menu: Network 38
- Setup Global Configuration 39
- Setup Network Interfaces 40
- Setup Network Ipv4 Parameter 40
- Menu: Setup Ipv6 Parameter 41
- Menu: Link Mode 41
- Menu: Setup Services 42
- Menu: System 42
- Set time zone 42
- left part of 43
- The WEB interface 45
- Configuration: Main Menu 47
- Configuration: Ethernet 48
- IPv4 addresses and DHCP 50
- IPv6 addresses and autoconf 50
- High Availability Bonding 51
- Configuration: Notification 53
- Alarm events 54
- E-mail messages 54
- Windows Popup Messages 55
- SNMP-TRAP messages 55
- VP100/NET wall mount display 55
- User defined Alarm scripts 56
- NTP Client Monitoring 56
- Alarm messages 57
- Configuration: Security 58
- Password 59
- HTTP Access Control 59
- SSH Secure Shell Login 60
- NTP keys and certificates 62
- SNMP Parameter 62
- Configuration: NTP 63
- LANTIME/GPS : 96 h 65
- LANTIME/PZF : 0,5 h 65
- LANTIME/RDT: 0,5 h 65
- LANTIME/NDT: 96 h 65
- NTP Authentication 66
- NTP AUTOKEY 68
- Configuration: Local 71
- Administrative functions 72
- User Management 73
- Administrative Information 74
- Software Update 76
- Automatic configuration check 77
- Get Diagnostics Information 78
- Web interface language 78
- Configuration: Statistics 79
- Statistical Information 80
- Configuration: Manual 81
- The Command Line Interface 83
- CLI Ethernet 84
- CLI Notification 87
- CLI Security 91
- CLI NTP Parameter 93
- CLI NTP Authentication 94
- CLI NTP Autokey 94
- CLI Local 95
- Administrative information 96
- SNMP Support 99
- Configuration over SNMP 101
- SNMP Traps 109
- SNMP Trap Reference 110
- CE-Label 112
- Connector Assignments 113
- Rear Panel Connectors 113
- RS232 TERMINAL 114
- Time Sync 115
- Oscillator options 117
- Signal Description GPS170 119
- Tastatur 122
- Timecode (option) 124
- Abstract 124
- Principle of Operation 124
- Block Diagram Timecode 124
- IRIG Standard Format 125
- AFNOR Standard Format 126
- Generated Time Codes 128
- AM - Sine Wave Output 129
- PWM DC Output 129
- Technical Data 129
- Time Strings 130
- Format of the SAT-Time String 132
- Konformitätserklärung 140
- Lantime M300/GPS 140
- Global Configuration File 143
- Global Option File 144
- Third party software 145
- Operating System GNU/Linux 145
- Reference 151
© 2020, manymanuals.com. All rights reserved. | 0.140 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals